I’ve started a new artwork, and here is the sketch! It features a dark unicorn and fairy. I’ve only ever drawn a couple unicorns, so I was overdue to do another one. Of my others, one was a commission and the other is a really old drawing that I don’t even have on my website.
Last month sometime, I was watching the movie “The Grey” with Liam Neeson and was inspired by all the wintry landscape. And for some reason a unicorn came to mind. I can’t explain how these things happen since I don’t even know myself. lol That’s just how it came to me. And I decided to pair it with a pretty fairy, since I haven’t painted any fairies in a while. My Fairies Gallery is lagging behind, without a single painting from this year added to it. It’s time to rectify that. 😉
I have no idea what I’m going to name this painting yet. I’ll give it some though as I work. Meanwhile, I welcome any suggestions.
Anyway, the heat finally broke this week and it has been a beautiful low to mid 80s. So time to get back to work. I made one disastrous attempt at this painting. The background turned out all wrong. So I’m trying a different approach.
I’ve actually managed to go this long as a watercolor artist without ever stretching my paper. I often work small enough that the paper buckling isn’t a problem, and when I have done larger paintings I’ve gotten lucky enough that any warping of the paper didn’t effect how the painting turned out. But this is the second time this year, where I’ve had a wash turn out awful due to the paper buckling and have had to trash the painting. So I’m finally caving and am going to stretch the paper for the first time with this painting. This was kind of a spur of the moment decision, so after soaking the paper in water, I stapled it to foam board. In the future, I will get something more substantial to attach it to. I have some hardboard panels, but I they’re too thin to put staples through and they’d be really hard to remove. So hopefully the foam board will do for now. I’ve read that gator board is a good choice so I think I’ll try that next time.
Once the paper is completely dry, then I’ll transfer the sketch onto it. I’m also going to put some masking tape around the edges for a clean line, though I know I’m going to trim off at least some of the border. In the future, I will leave a larger border too. This one is cut a little close. Oh well. 🙂
I just may update this tread with some more progress of this painting, so check back if you want to see it!
Well, I’ve learned that foam board is NOT a good surface to attach this to. It seemed like it was going to go well, but then I get up this morning and see that it curved the whole board as shown in the photo. I knew that it might absorb the water since the foam board surface is just paper, but I hoped maybe it would still stay flat because of the foam. No such luck.
So, I’ve started a new method. The thing is that I have to use materials that I already have right now. The craft stores I have around me (Michaels, Hobby Lobby) are pretty worthless for a lot of art supplies. They don’t have any kind of board that would be good for stretching and don’t even have gummed tape, which would be nice to try instead of staples. I usually order a lot of my art supplies online, but I don’t want to have to wait for them to arrive. I’ll get them for future use, but I want to get started on this painting now!
This time around, I’m going to try using a piece of hardboard that I have. The main reason I didn’t try this in the first place is that I would have to use heavy duty staples, which will be harder to remove, and that the board is only 1/8″ thick and my shortest staples are 1/4″.
I’ve solved the thickness problem by taping a layer of foam board to the back of the panel. This gave just enough extra thickness that the staples didn’t poke through the back.
After cutting the paper to the size I want it, I get a container of water and dip the paper in it for a few minutes. Then I lay it flat on the board and smooth it out with a paper towel, pushing all the excess water off of the paper. Once I’m sure that it’s flat and ready, I start stapling it down.
So, now I have it stapled down and am currently waiting for it to dry completely. Fingers crossed that it will work out this time!
7/11 Part 2:
Ready to move on to painting!
I pretty much have the background done now. I added the nearest, darkest trees. I made the branches a little denser than in the sketch. I also shaded the snow and defined the fairy and unicorn so that they’re easier to see when it come time to paint them in. I may think that the background needs more work once I get the foreground figures painted, but for now it looks pretty good.
Now it is time for the fun part… painting the fairy and unicorn! I know I’m going to start her skin next. I’m not sure if I will finish her completely before moving on the the unicorn or work on them both at the same time.
I did quite a bit of work on the fairy! I hope to get this done in the next couple of days. I’m pretty happy with how it’s coming along so far. 🙂
I’m happy to say that I finished this painting last night and am really happy with how it turned out. It could be my favorite that I’ve done this year! :)After finishing the painting, I had to remove it from the board. Since this was my first time stretching my watercolor paper and I had to use heavy duty staples, I wasn’t sure how this would go. I just knew that I had to proceed very carefully! The first step was to remove the masking tape. That went well and left a nice clean border around the painting. My main concern was getting the staples out without hurting the painting.
11 thoughts on “Unicorn and Fairy WIP”
Hi there, I'm a new follower of yours and I have to say that unicorns are a real love of mine so I'm thrilled that the first post I've seen features a beautiful unicorn!
Your artwork is stunning and this piece is no exception. I'm not good at thinking up names so I'll leave that to the far more creative people!
Thank you for sharing your design process and your newest picture!
Thank you very much!! 🙂
I hear you about the heat rebecca it was awful here too, first time we have a pool and i'm kinda taking advantage of it but still the heat is just awful really drains your energy , got a bit cooler here too 🙂
I have read about stretching paper when doing watercolors i never tried it myself sounds good especially for larger scale of artworks, when you finish the artwork will you unstable it from the foam?initially when i saw the thumbnail i thought it was canvas you really did a good job stabling it! i hate the bulking too,i kinda like the watercolor pads they seem to prevent that but they dont always come in large sized i think biggest one i have is 14 x 10 by arches hotpress.Good luck with the painting i will be following the progress xoxo
This first attempt was a failure. I've learned that foam board is not a good surface. I was afraid that it might not work on it but I hoped it would. Since it absorbed some of the water the whole surface curved as it dried. I'm going to update this blog in a little bit with pics. I now have a second attempt drying stapled to hardboard. Hopefully this will work better. At the moment, I have to use materials I already have since I don't have a good art supplies store nearby, and I don't want to wait for an online order if I don't have to. I'll update soon with how it goes…
And yes, once it is done, you take the staples out and detach it. I'll most likely trim off the edges with the holes too.
it looks wondeful rebecca glad you got it to work the second time around! the gummy tape sounds a bit easier to handle than staples , do you think it works if you stable a paper without stretching it? i often find artists tape really doesn't hold papers that well especially if you do a lot of background washes so many times i had to re-tape a few areas.Love the skintones you painted!
Thanks, Katerina! I actually haven't started the skin yet. That's just masking fluid. 🙂
For smaller paintings, just taping it down works fine. Up until now, that is what I've been doing for all of my artwork (except ACEO-5×7"). I only seems to run into problems with the larger paintings, maybe 9×12" and larger. Just taping them down isn't quite good enough. I've always managed to make the paintings work out, but this year I've messed up 2 beyond saving. So I figured it was time to try out stretching.
Wow, it's coming along so well!
Sorry you've had a few issues with the paper, but hopefully things should go a little more smoothly now.
Thank you for sharing the updates!
love what you did so far the colors are beautiful it really does give it a night/moonlight look, i have masking fluid and never tried it, mostly out of fear i will damage the paper when removing it, but makes it so much easier when doing background colors and not being scared getting color to the areas you dont want to.
Thank you, both!
I can only say for Arches paper that as long as you don't leave the masking fluid on for too long, like only a day or two, then it doesn't hurt the paper. If left on longer, it sometimes roughs the surface up a little. And I use Windsor and Newton colorless masking fluid. There are some that dry colored, but some of them can stain the paper. I had one by Shiva, and it was pretty good at first but by the time I got to the bottom of the bottle it started staining the paper a yellowish color. So I just stick with Windsor and Newton now.
It's beautiful! the level of detail is amazing. I love the way the snowflakes look like they have just rested as they have fallen. The unicorn is stunning!
I'm so glad that the staples came out without causing any damage.
You should be so pleased with the result, it truly is a beautiful picture and your talent is amazing!
Thank you very much, Miamina! 🙂